Garage doors
Garage door spring replacement: what it costs in Massachusetts
How this range is built
| Part of the job | Low | High |
|---|---|---|
| Parts and materials | $60 | $200 |
| Labor: 1.2 to 2 hours × $100 to $140 an hour | $120 | $280 |
| Fees: disposal, permits, supplies | $0 | $100 |
| Total, rounded | $180 | $580 |
The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in Boston, $39.07 an hour, times 2.6 to 3.6 to cover what a contractor bills (overhead, tools, insurance, profit). Materials are a band from basic to high-end. Full method.
Not a repair shop, estimates only. Typical range, estimate. Not a quote. Your home, materials and contractor change the number.
Replace a broken torsion spring. The door will not open without it. Dangerous work under high tension.
Got a quote for this job?
Check it with the button above, or share what you were quoted so the range gets better.
Get quotes from local pros
Tell us about the job and your ZIP. Free, takes a minute.
Fair Price is not a contractor or a repair shop. Who sees your request
What is usually included
- New torsion springs
- Balance and test
- Lubricate rollers
- Safety check
What moves the price
- One vs two springs
- Door weight
- After-hours calls, which cost more
- Cycle-rated spring
Questions to ask before you say yes
- Do you replace both springs?
- What cycle rating?
- How long are the springs and labor warranted?
- Do you inspect the cables?
Can you do it yourself?
Do not DIY. Torsion springs can cause serious injury.
Common questions
How long do springs last?
Most last about 10,000 cycles, or 7 to 10 years for a family using the door a few times a day. Replace both springs together.
Can I DIY?
No, this is a job for a pro. Garage springs hold huge tension and can cause serious injury if they let go.
Why do springs break?
Metal fatigue after thousands of cycles, plus rust and cold weather. When one breaks, the door gets heavy and the opener may not lift it.
How much does garage door spring replacement cost in Massachusetts?
A typical range is $180 to $580. It is an estimate built from labor wages and material prices, not a quote.
Typical range in 10 metro areas
Only the labor rate changes between cities. Same parts, same hours.
| Area | Typical range, estimate |
|---|---|
| Boston area, Massachusetts | $180 to $580 |
| New York City area | $180 to $580 |
| Los Angeles area, California | $180 to $570 |
| Chicago area, Illinois | $180 to $590 |
| Houston area, Texas | $130 to $480 |
| Dallas-Fort Worth area, Texas | $130 to $470 |
| Phoenix area, Arizona | $150 to $510 |
| Atlanta area, Georgia | $130 to $480 |
| Miami area, Florida | $140 to $490 |
| Seattle area, Washington | $180 to $590 |