Plumbing
Faucet or toilet replacement: what it costs in Massachusetts
How this range is built
| Part of the job | Low | High |
|---|---|---|
| Parts and materials | $120 | $650 |
| Labor: 1.5 to 4 hours × $115 to $160 an hour | $173 | $640 |
| Fees: shop supplies, disposal, diagnostics, permits | $0 | $100 |
| Total, rounded | $290 | $1,400 |
The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in Boston, $44.62 an hour, times 2.6 to 3.6 to cover what a contractor bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.
Not a repair shop, estimates only. Typical range, estimate. Not a quote. Your car, parts and shop change the number.
Remove an old kitchen or bath faucet or toilet and install a new one. Fixture price varies widely.
Got a quote for this job?
Check it with the button above, or share what you were quoted so the range gets better.
What is usually included
- Remove and dispose of old fixture
- Install new fixture and supply lines
- New wax ring or shutoffs if needed
- Leak test
What moves the price
- Fixture quality and brand
- Corroded or stuck shutoff valves
- Extra work to reseat or shim
- Waste haul-away
Questions to ask before you say yes
- Do I supply the fixture or do you?
- Will old shutoff valves be replaced?
- Is haul-away included?
- What if I find a leak behind the wall?
Can you do it yourself?
A reasonable DIY for most homeowners if shutoffs work. Stuck or corroded valves are the main risk.
Common questions
Can I just buy the faucet myself?
Yes, and many plumbers will install a faucet you bring. Check they will cover labor only, since they may not warranty a part they did not supply.
Why is a toilet install more than expected?
A rotted floor flange, old shutoff valves, or a stuck old toilet can add time. The plumber may also need to haul the old one away.
How long does it take?
A faucet swap takes about 1 to 2 hours. A toilet takes about 1 to 2 hours too, longer if the shutoff or floor flange needs repair.
How much does faucet or toilet replacement cost in Massachusetts?
A typical range is $290 to $1,400. It is an estimate built from labor wages and material prices, not a quote.
Typical range in 10 metro areas
Only the labor rate changes between cities. Same parts, same hours.
| Area | Typical range, estimate |
|---|---|
| Boston area, Massachusetts | $290 to $1,400 |
| New York City area | $290 to $1,375 |
| Los Angeles area, California | $270 to $1,325 |
| Chicago area, Illinois | $300 to $1,425 |
| Houston area, Texas | $240 to $1,200 |
| Dallas-Fort Worth area, Texas | $240 to $1,200 |
| Phoenix area, Arizona | $250 to $1,250 |
| Atlanta area, Georgia | $230 to $1,175 |
| Miami area, Florida | $220 to $1,150 |
| Seattle area, Washington | $300 to $1,425 |