Skip to content

Car · Jeep recalls

2019 Jeep Wrangler recalls

NHTSA lists 9 recall campaigns for the 2019 Jeep Wrangler, filed between September 28, 2018 and September 12, 2024. Each one is below with what is wrong and the free fix.

Check my VIN for open recalls

CampaignFiledPart
24V676000September 12, 2024Back over prevention: camera
24V652000September 5, 2024Electrical system: instrument cluster/panel
23V116000February 23, 2023Power train: clutch assembly
21V028000January 28, 2021Power train: clutch assembly
20V580000September 24, 2020Seat belts
20V191000September 10, 2020Back over prevention: camera
20V124000March 3, 2020Power train: clutch assembly
19V201000March 14, 2019Steering
18V675000September 28, 2018Structure: frame and members

Back over prevention: camera (24V676000)

Filed September 12, 2024

What is wrong. Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."

What could happen. A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.

The fix. Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.

Electrical system: instrument cluster/panel (24V652000)

Filed September 5, 2024

What is wrong. Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."

What could happen. An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.

The fix. Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.

Power train: clutch assembly (23V116000)

Filed February 23, 2023

What is wrong. Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

What could happen. Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix. Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.

Power train: clutch assembly (21V028000)

Filed January 28, 2021

What is wrong. Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

What could happen. Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix. FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.

Seat belts (20V580000)

Filed September 24, 2020

What is wrong. Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.

What could happen. In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.

The fix. Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.

Back over prevention: camera (20V191000)

Filed September 10, 2020 · Fix by software update

What is wrong. Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

What could happen. The lingering rearview image can distract the driver, increasing the risk of a crash.

The fix. Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.

Power train: clutch assembly (20V124000)

Filed March 3, 2020

What is wrong. Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

What could happen. The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix. Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

Steering (19V201000)

Filed March 14, 2019

What is wrong. Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.

What could happen. If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.

The fix. Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge. The recall began April 5, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V29.

Structure: frame and members (18V675000)

Filed September 28, 2018

What is wrong. Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

What could happen. An unexpected reduction in steering ability, can increase the risk of a crash.

The fix. Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.

Check that your car is on the list

Most campaigns cover only cars built in a certain date range or at a certain plant, so a 2019 Jeep Wrangler may or may not be included. The VIN is the only sure test. It is 17 characters, on the dashboard by the windshield and on the driver door jamb sticker. Look up your VIN.

How to confirm the repair is free

If you already paid for a repair that a recall later covered, Jeep may owe you a refund. Ask the dealer or Jeep customer service about reimbursement, and keep your receipts.

Other model years of the Wrangler

More: all Jeep recalls, check-engine codes, car repair costs.

2019 Jeep Wrangler recall questions

How many recalls does the 2019 Jeep Wrangler have?

NHTSA lists 9 recall campaigns for the 2019 Jeep Wrangler. A campaign can cover only some cars of that model year, so check your VIN to see whether yours is included.

Is a recall repair on a 2019 Jeep Wrangler free?

Yes. A safety recall repair is free at an authorized Jeep dealer, whatever the age or mileage of the car and no matter who owns it now.

How do I know if my 2019 Jeep Wrangler was already fixed?

Enter the VIN on our recall page. If a campaign is still open, it shows as open. You can also ask a dealer to run the VIN, or look at the service history paperwork for the campaign number.

Source: NHTSA recalls API, checked 2026-10-28. Text is NHTSA's wording of each campaign. New campaigns are added over time. Not a repair shop, estimates only.