Skip to content

Emissions code

P0138: Rear oxygen sensor reads high (bank 1, after converter)

How much to fix P0138? Typically $100–$350.

Typical repair range in the US · Estimate · Prices updated October 2026
$100 to $350
Typical range, estimate. Built from labor wages and part price bands.
How this range is built
Part of the jobLowHigh
Parts$40$180
Labor: 0.6 to 1 hours × $110 to $150 an hour$66$150
Fees: shop supplies, disposal, diagnostics$0$15
Total, rounded$100$350

The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in the US, $27.13 an hour, times 4 to 5.5 to cover what a shop bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.

This is the range for the most common fix, oxygen sensor replacement (one sensor). Which repair your car needs depends on a proper diagnosis.

The oxygen sensor after the catalytic converter is stuck sending a high voltage that stays high. This can mean the sensor failed or its wire touches a power source, but it can also mean the engine really is running rich and unburned fuel is passing through the converter.

Safe to drive?
Usually yes, for now
Most common cause
Failed rear sensor

Safe to drive for now; check if it smells like fuel.

Get quotes from local shops

Got P0138? Tell us your ZIP and a shop near you can quote the repair. Free, takes a minute.

Add a phone, an email, or both.

Fair Price is not a contractor or a repair shop. Who sees your request

What you may notice

Common causes, most likely first

  1. Failed rear sensor
  2. Shorted wire
  3. Engine running rich
  4. Coolant or oil contaminating the sensor
  5. Leaking injector

Check this first

Look at your list for a rich code such as P0172 stored at the same time. If one is there, fix the rich condition first, because a new rear sensor will just read high again.

Other repairs that sometimes fix P0138

RepairTypical range, US
Diagnostic scan (check engine light)$55 to $250
Vacuum leak repair$90 to $460

Before you pay

Got a quote already? Check it against the range. Want to see if your car has a recall tied to this problem? Check recalls by VIN.

Need to read a code yourself? OBD-II scanners on eBay (affiliate link, disclosure).

P0138 questions

Why does a rich engine cause it?

When the engine runs rich, leftover fuel travels into the exhaust. The sensor behind the converter reads that as a high signal, so it can look like a sensor failure when the root cause is upstream.

Could coolant be the problem?

Rarely, but coolant leaking into the combustion chamber can burn on the sensor and ruin it. If you also lose coolant with no visible leak, tell the shop so they can check the head gasket.

Are rear sensors costly?

They land in the moderate range, with price depending on your make. The sensors are usually reachable from under the car and labor is small, but a rusted sensor can need extra time to remove.

How much does it cost to fix P0138?

The most common fix, oxygen sensor replacement (one sensor), has a typical range of $100 to $350 across the US. It is an estimate built from parts prices and local labor wages, not a quote. Your car and shop change it.

Typical range in 10 metro areas

Only the labor rate changes between cities. Same parts, same hours.

AreaTypical range, estimate
Boston area, Massachusetts$110 to $370
New York City area$110 to $360
Los Angeles area, California$110 to $370
Chicago area, Illinois$100 to $350
Houston area, Texas$100 to $340
Dallas-Fort Worth area, Texas$100 to $340
Phoenix area, Arizona$100 to $350
Atlanta area, Georgia$100 to $350
Miami area, Florida$100 to $350
Seattle area, Washington$110 to $370

Related codes

More emissions codes

Code meaning written in our own words. Some codes mean different things on different makes, so check your scan tool or manual. Not a repair shop, estimates only.