Electrical
Electrical panel upgrade (200 amp): what it costs in Massachusetts
How this range is built
| Part of the job | Low | High |
|---|---|---|
| Parts and materials | $1,200 | $2,500 |
| Labor: 10 to 20 hours × $105 to $145 an hour | $1,050 | $2,900 |
| Fees: disposal, permits, supplies | $300 | $900 |
| Total, rounded | $2,550 | $6,300 |
The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in Boston, $40.08 an hour, times 2.6 to 3.6 to cover what a contractor bills (overhead, tools, insurance, profit). Materials are a band from basic to high-end. Full method.
Not a repair shop, estimates only. Typical range, estimate. Not a quote. Your home, materials and contractor change the number.
Replace an older 60 to 100 amp panel with a 200 amp panel. Needed for EV chargers, heat pumps, or when the old panel is unsafe.
Got a quote for this job?
Check it with the button above, or share what you were quoted so the range gets better.
Get quotes from local pros
Tell us about the job and your ZIP. Free, takes a minute.
Fair Price is not a contractor or a repair shop. Who sees your request
What is usually included
- New 200A panel and breakers
- New meter socket if needed
- Grounding update
- Utility coordination
- Permit and inspection
What moves the price
- Meter relocation or service mast
- Utility disconnect and reconnect scheduling
- Number of circuits
- Arc-fault and GFCI breakers required by code
Questions to ask before you say yes
- Is the utility disconnect included?
- How many circuits will be updated to current code?
- Are the electrical permit and the inspection included?
- How long will the power be off?
Can you do it yourself?
Not a DIY. Service work is dangerous and requires a licensed electrician and permit.
Common questions
When do I need a panel upgrade?
When you add a heat pump, EV charger, or the panel is a known fire risk brand or overloaded.
How long is power off?
Usually one workday, about 6 to 10 hours. The electrician and the utility must coordinate, so plan around the date.
Is a permit needed?
Yes. A panel upgrade needs an electrical permit and an inspection in Massachusetts. The electrician normally pulls the permit and schedules the inspector.
How much does electrical panel upgrade (200 amp) cost in Massachusetts?
A typical range is $2,550 to $6,300. It is an estimate built from labor wages and material prices, not a quote.
Typical range in 10 metro areas
Only the labor rate changes between cities. Same parts, same hours.
| Area | Typical range, estimate |
|---|---|
| Boston area, Massachusetts | $2,550 to $6,300 |
| New York City area | $2,600 to $6,500 |
| Los Angeles area, California | $2,550 to $6,200 |
| Chicago area, Illinois | $2,700 to $6,700 |
| Houston area, Texas | $2,250 to $5,500 |
| Dallas-Fort Worth area, Texas | $2,250 to $5,500 |
| Phoenix area, Arizona | $2,300 to $5,600 |
| Atlanta area, Georgia | $2,300 to $5,500 |
| Miami area, Florida | $2,250 to $5,500 |
| Seattle area, Washington | $2,750 to $6,900 |